|
TINALab II High Speed Multifunction PC Instrument
With TINALab II you can turn your laptop
or desktop computer into a powerful, multifunction test and measurement
instrument. Whichever instrument you need multimeter, oscilloscope,
spectrum analyzer, logic analyzer, arbitrary waveform generator,
or digital signal generator it is at your fingertips with a
click of the mouse. In addition TINALab II can be used with
the TINA circuit simulation
program for comparison of simulation
and measurements as a unique tool for circuit development, troubleshooting,
and the study of analog and digital electronics.
More information
TINALab II High Speed Multifunction PC Instrument
TINALab II includes a DC to 50MHz bandwidth, 10/12 bit resolution,
dual-channel Digital Storage Oscilloscope. Due to its advanced
equivalent-time sampling technology,
TINALab can acquire any repetitive signal with up to 4GS/s equivalent
sampling rate, while in single shot mode the sampling rate is
20 MS/s. The full scale input range is ±400V, with 5mV to 100V/div
ranges.
The synthesized Function Generator provides sine, square, ramp,
triangle and arbitrary waveforms from DC to 4MHz, with logarithmic
and linear sweep, and modulation up to 10V peak to peak. Arbitrary
waveforms can be programmed via the high level, easy to use
language of TINA's Interpreter.
Working automatically in conjunction with the Function Generator,
the Signal Analyzer measures and displays Bode amplitude and
phase diagrams, Nyquist diagrams, and also works as Spectrum
Analyzer.
Digital I/O for the high-tech Digital Signal Generator and Logic
Analyzer instruments allow fast 16-channel digital testing up
to 40MHz.
The optional Multimeter for TINALab II allows DC/AC measurements
in ranges from 1mV to 400V and 100 µA to 2A. It can also measure
DC resistance in ranges from 1W to
10MW.
Using TINALab II with TINA gives you the unique capability to
have circuit simulation and real time measurements in the same
integrated environment. This provides an invaluable tool for
troubleshooting and brings your designs to life by comparing
simulated and measured results.
You can also plug Experimenter Modules into the slot on the
front of TINALab II, allowing you to simulate, measure, and
troubleshoot virtually the whole range of analog and digital
electronics.
Real-time Storage
Oscilloscope
Observe the actual time response of your
circuit. Set up the Function Generator for waveform, amplitude,
and frequency, drive the test circuit, and see the real-time
response along with thevirtual response of the simulated circuit.
Real-time Signal Analyzer
Measure the frequency response of your circuit
in real-time. TINALab's Function Generator will generate a
real swept-sine signal, capture the response, and display
it on the Signal Analyzer, where it can be compared to the
virtual (simulated) measurements.
Real-time Logic Analyzer
Set up the test stimulus for your logic circuit
with the Digital Signal Generator and see eight channels of
your circuit's real-time digital response on the Logic Analyzer.
|
|
|